Poland's new building regulations (WT 2026): what applies after 20 September and what it means for your plot
Poland's new regulation on technical conditions for buildings (warunki techniczne, or WT) was due to apply from 20 September 2026. As of 13 October it had still not been signed or published in the Journal of Laws, so houses and apartment blocks are still designed to the existing rules. This is what applies today, what the draft would change, and which of those rules affect what you can fit on a plot.
Building lawPublished7 min read
What applies after 20 September 2026?
The draft regulation went through public consultation and notification to the European Commission, but the minister has not signed it and it has not been published (Murator, in Polish). The ministry has not given a new date.
An act of 31 July 2026 (Dz.U. 2026 item 1161) prepared for exactly this by adding Article 102a to the Building Law. For 18 months from 20 September 2026, that is until 20 March 2028, the site development design and the architectural design may be prepared under the rules in force up to 19 September 2026 (WP Dom, in Polish).
- Permits and notifications: the statement is filed with a building permit application, an application to approve the design, or a construction notification. The technical design is then also prepared under the old rules (Article 102a(1) and (2)).
- New designs: if the architect designs to the old rules, the investor files a statement with the authority saying the design was prepared under them.
- Existing buildings and fences: the new rules are not retroactive. Nobody will have to rebuild a house or a fence because the regulation changed.
In practice, most house designs until March 2028 will follow the technical conditions that have been in place for years.
Formally, the 2002 regulation ceased to apply on 20 September 2026, as the 2019 Accessibility Act provided (Article 66). It is still used only through Article 102a, once the investor files the statement. Without the statement, the designer relies on the Construction Law and sound engineering practice, with no detailed regulation (Inżynier Budownictwa, in Polish).
How far a building must stand from the plot boundary
This is the part of the rules that most affects what fits on a given plot. Until March 2028 it can be applied as it stands, while the draft new regulation measures distances differently (see below). Under § 12 of the previous technical conditions, a building must stand at least the following distance from the boundary with a neighbouring building plot:
- 4 m if the wall facing the boundary has windows or doors,
- 3 m if that wall has no windows or doors,
- 5 m for a multi-family residential building taller than 4 storeys, with or without windows (a rule in force since August 2024).
Exceptions worth knowing before you buy. For a wall without windows or doors, a local zoning plan (MPZP) may allow a distance of at least 1.5 m from the boundary, or building right on it. On a plot 16 m wide or narrower, a single-family house may stand with a wall without windows or doors on the boundary, or between 1.5 and 3 m from it. Fire safety rules and the daylight rights of neighbouring buildings still apply in every case.
A simple example: on a plot 20 m wide, a house with windows on both sides can be at most 12 m wide (20 m minus 2 times 4 m). With one blank side wall, that becomes 13 m. On a plot 14 m wide, the same house with windows on both sides would have only 6 m, but the narrow-plot exception lets a blank wall stand right on the boundary.
How much of the plot you can build on is not a WT question
The technical conditions set a minimum biologically active area only for some plots: at least 25% for multi-family buildings, healthcare buildings (other than clinics), and schools and childcare buildings, unless the local plan sets a different share (§ 39).
For a single-family house, the size of the building and the share of green space that must remain are set by the local zoning plan, or by a zoning decision (WZ) where there is no plan. These fix the maximum height, the building footprint, the building intensity and the biologically active share. In a gmina with a general plan, the municipal planning standards also set the frame, which we cover in the article on the general plan.
The new technical conditions will not change that. If you want to know what house fits on a plot, start with the plan, and only then work out the distances from the boundaries.
Gates that open onto the pavement have been banned since 2002
Many articles about the new rules say gates and wickets will no longer be allowed to open outward from the plot. That is not new: § 42 of the previous technical conditions has said exactly that since 2002. The minimum widths in § 43 are also unchanged: 2.4 m clear for a gate and 0.9 m for a wicket.
The real change in the draft concerns sharp elements. Today, barbed wire, broken glass and sharp-ended elements are banned on a fence below 1.8 m. The draft raises that limit to 2.2 m (Dziennik.pl, in Polish). Existing fences are not covered unless they are rebuilt.
What the draft would change once it takes effect
The rules below come from the draft regulation, not from the law in force. Their wording and numbering may still change before publication.
- Lifts: required in multi-family buildings with three or more storeys.
- Acoustics: multi-family buildings, terraced and semi-detached houses, and single-family houses with two units must meet acoustic class AQ-0.
- Accessibility: at least 6% of flats, and no fewer than one, adapted for people with disabilities in buildings with more than four units.
- Home batteries: in a single-family house, a battery of up to 30 kWh in a utility room or garage, provided the room is fire-separated and fitted with smoke and carbon monoxide detectors.
- Solar energy: from 31 December 2029, every new residential building, single-family houses included, and any covered parking attached to it must have a solar installation (photovoltaics or solar thermal). The cost-effectiveness test, a payback within 15 years, applies in the draft only to non-residential buildings.
- EV charging: car parks serving multi-family buildings must have charging infrastructure in line with the electromobility act, plus bicycle parking.
- Distance from the plot boundary: at least 3 m to the wall, but 4 m to the edge of a window or door in a wall facing the boundary (5 m for a multi-family building over 4 storeys). The narrow-plot exception would apply where a 16 by 16 m square cannot be drawn on the plot, instead of to plots up to 16 m wide. An outbuilding or garage on the boundary may be up to 7 m long and 3.5 m high.
Energy requirements do not change at first: the primary energy indicator (EP) for a single-family house stays at 70 kWh/(m²·year), and the heat transfer coefficient of an external wall at 0.20 W/(m²·K), as since 2021. From 1 January 2030 the draft lowers EP to 63 for a single-family house and from 65 to 58 for a multi-family building, and adds the zero-emission building requirements of the EPBD directive. All of these rules come from the draft of 6 August 2026 notified to the European Commission (in Polish).
What this means if you are buying a plot
1. The new technical conditions do not change whether a plot can be built on. That comes from the local zoning plan, or without one from a zoning decision, which since 1 September 2026 can only be issued inside the infill area designated in the general plan.
2. Measure the plot. On plots narrower than about 20 m, the boundary distances decide how wide a house can be. Today building on the boundary is allowed on plots up to 16 m wide; under the draft it depends on whether a 16 by 16 m square fits. A narrow but long plot could lose that exception.
3. If an architect is already working on a design, ask which rules they are designing to. Until 20 March 2028 the investor chooses, and the old rules require a statement.
4. If you are designing a house with a home battery, or a semi-detached house, check with your designer whether the draft requirements would change the room layout.
Frequent questions
Did the new technical conditions take effect on 20 September 2026? No. As of 13 October 2026, the regulation had not been signed or published in the Journal of Laws. Designs follow the previous rules, on the strength of the investor’s statement under Article 102a of the Construction Law.
Until when can I design to the old technical conditions? Until 20 March 2028, which is 18 months from 20 September 2026. The investor files a statement that the design was prepared under the existing rules.
What is the minimum distance from a house to the plot boundary in Poland? 4 m from a wall with windows or doors and 3 m from a wall without them. A local plan may allow at least 1.5 m or building on the boundary, and on a plot up to 16 m wide a single-family house may stand with a blank wall on the boundary. The draft new regulation measures 4 m to the edge of a window and 3 m to the wall, and replaces the 16 m width test with a 16 by 16 m square.
Do I have to change a gate that opens onto the street? The ban on gates and wickets opening outward has applied since 2002. The new rules change nothing here and are not retroactive.